Apollo Help Center logo
Apollo Help Center logo

All articles

Apollo Phantom advanced settings listUpdated 6 months ago

For information on how to access and adjust the advanced/P-settings on your Apollo Phantom, please watch the below video and find the list of all functions:

To access your advanced settings, hold the Up and Down arrows on your command center for 2-3 seconds while the scooter is on, until the display changes

Use the arrow buttons to change that specific setting, and the 'M' button to change to the next setting option (ie: P01 to P02). 

P1: LCD brightness, 1-3 

P2: Units km/mi 

P3: Battery Voltage, (52V Phantom: 52; 60V Phantom: 60) 

P4: Scooter Shut-off Time: minutes before the scooter shuts off with no activity. Default 5 

P5: Unused 

P6: Wheel Diameter, Default: 10

P7: # of magnets on motor, set to 30

P8: Power Level in speed units, 0 to 100% (display goes to 200, no change from 100 and up. If at 20, max speed will be 20 for example)

P9: Start Method. 0 for zero start, 1 for kick start. 

P10: Unused 

P11: Electronic braking strength. 0(off) – 5 (high). Default 1, Recommendation 2-3 (if electronic braking strength is set too high, it can throw you off the scooter if you are not careful)

P12: Acceleration. 1(low) – 5 (high). Default 3 

P13-15: Unused

P16: Lifetime odometer reset (only up to 100km)

P17: Cruise Control. 0 off, 1 on. 

P18-20: Unused

For any additional questions, feel free to reach out to our A-Team at [email protected]

Was this article helpful?