Apollo Help Center logo
Apollo Help Center logo

All articles

Apollo City Fender Removal/InstallationUpdated 6 months ago

This guide will show you how to replace the Apollo City’s fender if it’s broken or defective.

You will need the following tools for this repair:

  • Phillip's head screwdriver

STEP 1: Locate the fender screws

The City’s fender is secured with four bolts on the rear fork of the scooter. Start by locating these bolts, including the ones behind the deck. The screw’s locations are indicated below.

Step1.jpg

STEP 2: Remove fender screws

Insert a 2.5mm Allen key into the leftmost bolt. Turn counterclockwise to loosen. Remove screw and set aside. Repeat with the remaining 3 screws.

Step2small.gif 

STEP 3: Remove fender

Lift the fender outward and towards the back. The fender should come cleanly off the rear fork.

Step3.gif

STEP 4: Hold new fender in place

Align the screw holes in your replacement fender with those in the fork.

Step4.gif

STEP 5: Reinsert bolts and tighten

Reinsert the bolts into the screw holes, starting with the leftmost. Tighten with a 2.5mm allen key by turning clockwise. Repeat with remaining 3 screws.

Step5.gif

 

Your fender has now been removed and reinstalled. You’re done! 

If you have any other questions feel free to reach out to our A-Team at [email protected]

Was this article helpful?
Yes
No